Home Hyperformance Valves
BuaXua Calendar

Login Form



KURVERS PIPING

ONE STOP SERVICE

No matter what you have mind,  we are the ones to talk regarding all issues of your project.. We will do anything to carryout your project successfully. To support that, information management is an essential part of our quality management according to ISO 9001. We have developed a computer-supported network reflecting all areas of our group.thus, prompt access to detailed information is guaranteed and all parties involved-suctomer, supplier and project managers- always have the same level of information. We have a training programme which involves all employees. Any knowledge and experience  gained from individual projects is shared within the Kurvers group. Thus our employees have excellent expert knowledge and are able to support you even in a technical matters. read more...
PDF Print E-mail

Polylined KGV

These valves are being used extensively across North and South America and in Australia in the following mineral processing applications:

Copper Processing, CCD’s, POX, Tank Leach,  Copper Concentrating, cyclones & Tailings,  Lead / Zinc, Lime / Limestone

Gold Processing & Tailings, Phosphate, Phos-acid, Taconite / Iron Ore

These bi-directional valves manufactured between 2” – 40”, have two-piece bodies that encapsulate a replaceable one-piece liner. The liner is made of high quality polyurethane. The “Standard" liner has a temp rating of 200 deg F and the 'High Temp' liner 250 deg F. The Liner completely covers the internal part of the body.

The gland has a one-piece replaceable molded elastomer seal that stops any leakage. The maintenance instructions indicate the torques required on the gland bolts to get the optimum life from the seal.

The gates can be made from materials including 316 SS, Duplex 2205, Super Duplex 2507 304 SS, Alloy 31, Hastelloy etc. The thicknesses of the gates are  as follows:

02”-10” ½” thick,    12”-14” 5/8” thick, 16”-18” 1-1/8” thick,   20”-36” 1-½” thick,    40” – Above 2” thick

This valve can be re-built time and time again by your plant maintenance personnel. Besides providing exceptional wear life, the urethane liner is easy and inexpensive to replace. Usually, the Poly Lined valve can be rebuilt for 15 - 20% of the cost of a new valve.

This valve can be fitted with hand wheels or bevel gears for Manual operation or can be fitted with all types of actuators for on / off isolation.